Quick use guide, Connections, Speaker setup – Sylvania HT6051FB User Manual
Page 27
✄
1
2
If your TV has AUDIO/VIDEO input jacks, see the section “Connection to a TV” on page 10 of the
Owner’s Manual. If not, see the section “RF Modulator Connection” on page 11 of the Owner’s Manual.
Quick Use Guide
Connections
VIEWING AREA
Center Speaker
Subwoofer
Front
Speaker
(Left)
Wireless
Rear Speaker
Front
Speaker
(Right)
TV
1
1
2
3
4
Connect all the speakers and set up the system properly in order to
enjoy the Home Cinema experience.
Place the FRONT Left and Right speakers at equal distances from
the TV and at a 45-degree angle from the listening position.
Place the CENTER speaker above or below the TV to localize the sound.
Place the REAR (Wireless) speakers at normal listening ear level
behind the listening position.
Place the Subwoofer on the floor, near the TV.
4
4
3
3
2
2
1
1
Speaker Setup
4
5
Playback
Before:
¡Turn on the TV, amplifier and any other equipment which are connected to this player. Make sure
the TV and audio receiver (commercially available) are set to the correct channel.
WMA
WMA
WMA
MP3
MP3
MP3
CD
CD
CD
DVD-V
DVD-V
Press
[DVD POWER] to turn on the DVD/CD Player.
Insert a disc with label facing to the left (facing up for
horizontal installation).
Press [PLAY B] to start playback.
Press [STOP C] to stop playback.
4
4
3
3
2
2
1
1
To Change the On-Screen Language
3
1
1
Select the desired language
for the On-Screen Display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
Confirm that “QUICK” is selected.
SETUP
STOP
DVD POWER
QUICK SETUP
PLAYER MENU
ENGLISH
TV ASPECT
4:3 LETTER BOX
2
2
4
4
SETUP
To exit
the menu.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
or
ENTER
ENTER
ENTER
3
3
Confirm that “PLAYER
MENU” is selected.
QUICK SETUP
PLAYER MENU
ENGLISH
TV ASPECT
4:3 LETTER BOX
AM /FM Radio
Preset Radio Stations
1 Press [AMP POWER] to turn on the AV Receiver.
2 Press [TUNER] to select Tuner mode. The current radio frequency (station number) will appear on the display.
3 Press [REPEAT/BAND] to select FM or AM.
4 Use [TUNING o / p] to select the station you want to preset.
5 Press [SETUP] for 1 second. Preset number will flash.
6 Use [SKIP
H
H
H
H
/
G
G
G
G
] and select a preset number, then press [SETUP].
(See page 21 for more details.)
Selecting Radio Stations
1 Press [AMP POWER] to turn on the AV Receiver.
2 Press [TUNER] to select Tuner mode. The current radio frequency (station number) will appear on the display.
3 Press [REPEAT/BAND] to select FM or AM.
4 Use [SKIP
H
H
H
H
/
G
G
G
G
] to select a preset radio station.
5 Use [TUNING o / p] to change the radio frequency.
6 Press and hold [TUNING o / p] for 2 seconds for search mode. The next available station will be tuned.
(See page 21 for more details.)
DISPLAY
AUDIO
SUBTITLE
ANGLE
DVD POWER
CLEAR
SEARCH
MODE
PAUSE
SKIP
AMP POWER
DVD
TUNER
1
2
3
4
5
6
7
8
9
0
+10
PLAY
STOP
4
4
3
3
label
1
1
2
2
– 27 –
EN
E61TAUD_ENSP.qx33 05.8.9 10:51 AM Page 27