Onkyo TX SR805 - Manual (Page 105)

105
Zone 2 and Zone 3 —Continued
Selecting an Input Source for Zones
Notes:
• To select AM or FM, press the [TUNER] input selec-
tor button repeatedly. On the North American model,
you can also select XM or SIRIUS.
• Only analog input sources are output by Zone 2 and
Zone 3. Digital input sources are not output. If no
sound is heard when an input source is selected, check
to make sure it’s connected to an analog input.
• While Powered Zone 2 is being used, listening modes
that require surround back speakers (6.1/7.1), such as
Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema,
are unavailable.
• When Zone 2 is turned on, the output from the
ZONE 2 12V TRIGGER OUT goes high (+12 volts).
• While Zone 2 or Zone 3 is on, the Auto Power On/
Standby and Direct Change functions do not
work.
• You cannot select different AM or FM radio stations
for your main room, Zone 2, and Zone 3. The same
AM/FM radio station will be heard in each room.
• On the North American model, you can select a differ-
ent radio source for each room. For example, XM for
your main room, SIRIUS for Zone 2, and AM/FM for
Zone 3.
Turning Off Zones
Note:
• When Zone 2 is turned off, the output from the
ZONE 2 12V TRIGGER OUT goes low (0 volts).
1 On the remote controller, press
the [ZONE 2] or [ZONE 3]
REMOTE MODE button.
On the AV receiver, press the
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator
flashes, and the input selector currently
selected for the zone appears on the dis-
play.
2 On the remote controller, use the
INPUT SELECTOR buttons.
On the AV receiver, use the input
selector buttons, or press the
[ZONE 2] or [ZONE 3] button
repeatedly
The input source is selected, the zone is
turned on, the name of the input selec-
tor appears on the display, and the
ZONE 2 or ZONE 3 indicator lights
continuously.
ZONE 2
ZONE 3
ZONE 3
ZONE 2
AV receiver
Remote
controller
ZONE 2
ZONE 3
DVD
AUX 1 AUX 2 GAME/TV
CBL/SAT VCR/DVR
CD TUNER TAPE
PHONO
+10
1 2 3
4 5 6
7 8 9
AV receiver
Remote
controller
1 On the remote controller, press
the [ZONE 2] or [ZONE 3]
REMOTE MODE button.
On the AV receiver, press the
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator
flashes.
2 On the remote controller, press
the [STANDBY] button.
On the AV receiver, press the
[OFF] button.
The zone is turned off, and the ZONE 2
or ZONE 3 indicator goes off.
ZONE 2
ZONE 3
ZONE 3
ZONE 2
AV receiver
Remote
controller
OFF
STANDBY
AV receiver
Remote
controller