Oce North America LIGHTJET 430 - Manual (Page 9)

Ø
LightJet 430 Safety Information
45574-F see copyright, disclosure, use and duplication information on pg ii 1-1
1
LightJet 430 Safety Information
This manual is applicable to both the LightJet 430 and LightJet 430RS printers. All references
to the LightJet 430 also refer to the LightJet 430RS.
Important Safety Information For Maintenance
Personnel
The LightJet
®
430 is equipped with laser safety warning labels that are strategically placed to
remind user and maintenance personnel of laser safety issues before any exposure can occur.
Please note that the panels at the home (left) end cannot be removed by maintenance personnel.
These panels can only be removed by a qualified service engineer.
This is a Class 1 laser product meeting laser safety requirements of 21 CFR 1040 and
EN60825-1 as applicable. Laser devices contained within this equipment are hazardous. All
procedures necessary to perform user maintenance functions are outlined in this document.
Internal lasers have the following output characteristics under maximum conditions:
Laser Type Wavelength
(nm)
Output Power
(mW)
Beam Divergence
(mRad)
Helium Neon (HeNe) Red Laser: 633 14 1.4
Helium Neon (HeNe) Green Laser: 543 1.7 1.0
Argon (Ar+) Blue Laser: 458 2.5 1.0
Table 1-1. LightJet
®
430 laser specifications
CAUTION
DANGER: LASER RADIATION: THIS EQUIPMENT WILL EMIT LASER
RADIATION WHEN OPEN AND INTERLOCK SWITCHES DEFEATED. AVOID
EYE EXPOSURE TO DIRECT AND SCATTERED LASER RADIATION.
DANGER: RADIATIONS LASER: CET ÉQUIPEMENT PEUT ÉMETTRE DES
RADIATIONS LASER LORSQU’IL EST OUVERT ET EN CAS DE
DÉFAILLANCE DES INTERRUPTEURS DE SECURITÉ. EVITER TOUT
CONTACT DES YEUX AUX RAYONS DIRECTS ET INDIRECTS DES LASERS.
GEFAHR: LASERSTRAHLUNG: IM OFFENEM ZUSTAND UND MIT
ÜBERBRÜCKTEN SICHERUNGSSCHALTERN WIRD VON DIESEM GERÄT
LASERSTRAHLUNG EMITTIERT. VERMEIDEN SIE DIE BESTRAHLUNG DER
AUGEN DURCH DIREKTE ODER GETREUTE LASERSTRAHLUNG.