Oregon Scientific STARCK PS-M03 User Manual
Page 12
EN
11
SET OR CHANGE THE CLOCK
1.
Press SELECT to switch to the Clock Mode.
The time will flash.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
3.
Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting.
Press SELECT to confirm.
ALARM
When activated, the Melody Alarm starts quietly, then
gradually becomes louder. It shuts off after two
minutes. The LCD display lights up for the first
8 seconds.
The Radio alarm turns on the Radio automatically. It will
turn off after 2 hours.
SET ALARM
1.
Press SELECT several times until the Alarm
area flashes.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
3.
Select the hour, minute, and alarm type (
for
Melody Alarm or
for Radio Alarm). Press UP
or DOWN to change the setting. Press SELECT
to confirm.
If you choose , also select the melody (1 - 7)
and volume level (Lo or Hi).
PS M03 English R18
7/16/03, 1:04 PM
11