Oregon Scientific STARCK PS-M03 - Manual (Page 17)

EN
16
SENSOR SEARCHING
If there is no remote unit signal, the temperature and
humidity measurements will be blank. Check the remote
unit batteries, or press and hold UP and DOWN for
2 seconds to search for the remote unit(s).
Signals from household electrical appliances
such as doorbells and home security systems can
cause temporary reception failures between the indoor
and outdoor units. This is normal and does not affect
the general performance of the product.
Reception will automatically resume once the
interference ends.
COMFORT ZONE
The indoor and outdoor comfort zones are shown for
the following conditions.
NOTE
Searching No sensor Sensor found
Zone
Comfort
20 - 25 ° C
(68 - 77
°
F)
40 - 70%
Wet
Any >70%
Any
Dry
<40%
RelativeHumidity Temperature
PS M03 English R18 7/16/03, 1:04 PM 16