Oregon Scientific Multi-Band Radio-controlled Travel Alarm Clock RMB383A - Manual (Page 4)

4
GB
ANTENNA DISPLAYED ICONS
EUROPE
JAPAN-WEST/ USA/ UK
JAPAN-EAST
For the JAPAN-WEST/USA/UK antenna, follow the steps below
to pick up one of the three signals.
1.Plug in this antenna as instructed and the icon display will be
flashing. This unit is able to store the last used signal (e.g. if the
UK antenna was the last one used, after re-plugging in the
antenna, the icon will be displayed first).
2.Use [▲] or [▼] to select between the 3 signals.
3.Press [MODE] to confirm or simply leave it idle for 1 minute.
The entry will be confirmed and auto-reception will be activated
accordingly. The radio-reception icon will be flashing.
4.If the US signal is chosen, the ZONE icon will appear. Press
[MODE] then use [▲] or [▼] to toggle among the 4 US
time-zones: Pacific (P), Mountains (M), Central (C) or Eastern
(E).
5.Press [MODE] to confirm or simply leave it idle for 1 minute.
The entry will be confirmed and auto-reception will be activated
accordingly. The radio-reception icon will be flashing.
Without plugging-in the antenna, the main unit can be used alone
and act as a multi-functional digital clock.
To unplug the antenna, simply press the [RELEASE] button and
then pull out the antenna.
HOW TO ACTIVATE THE BACK-LIGHT
Press [ SNOOZE ] to turn on the back-light for 5 seconds.
Note:
-
The EL panel that provides illumination will lose power after
extensive usage.
- The unit may emit a quiet hissing sound whenever the display
is illuminated by the EL backlight. This is due to vibration of
the EL panel used for illumination and does not indicate
malfunction of the unit.
DISPLAY MODES
Press [MODE] to display the following in sequence:
1) Current Time 2) Current Time with Second Indication
Calendar Calendar