Oregon Scientific Multi-Band Radio-controlled Travel Alarm Clock RMB383A - Manual (Page 7)

7
GB
HOW TO USE THE DAILY ALARM
An alarm will go off for 2 minutes in two stepped crescendo patterns
if not cancelled. The [
] icon will flash and the back-light will be
activated for 5 seconds. To mute the alarm, press any key. Pressing
[ SNOOZE ] will activate the snooze function.
SNOOZE FUNCTION
When the snooze function is activated, the alarm will be muted
temporarily and set off again after 8 minutes. To disable the snooze
function, press any key (except [ SNOOZE ] ) when the alarm
goes off. Alternatively you can press and hold [ SNOOZE ] for
3 seconds when the snooze function is on.
INDOOR TEMPERATURE DISPLAY
This unit is capable of measuring the indoor temperature within a
range of -5
°
C to +50
°
C (23
°
F to 122
°
F).
To display the temperature, press [TEMP]. To change the
temperature display unit, press and hold [TEMP] for 2 seconds to
toggle between degree Celsius (
°
C) or degree Fahrenheit (
°
F).
If the temperature goes below or above the range measured, the
display will show "LLL" or "HHH" respectively.
KEY-LOCK FUNCTION
To lock all key operations when travelling, press and hold both [▲]
and [▼] buttons for 2 seconds. The key-lock icon [ ] will appear
and all key functions (except [RESET]) will be locked.
To unlock, press and hold both [▲] and [▼] again for 2 seconds.
The key-lock icon [ ] will disappear.
THE RESET BUTTON
The [RESET] button is used to reactivate synchronization of signals
after battery replacement or when the unit is malfunctioning. Use a
blunt stylus to hold down the button. All settings will return to their
default values.
NOTES ON ANTENNA
Warning: Do not touch the inner parts of the main unit and/or the
antenna as this may damage or cause malfunction to this device.