Oki 1.2 - Manual (Page 13)

5
II II
Installation
II II
Installation
Place the main unit in a vertical position as placing it horizontally could
shorten the life of the unit.
Connections
The following illustration shows where equipment should be connected
to the ports at the rear of the VoIP-TA unit.
Analogue telephone or G3 facsimile equipment
Connect an analogue telephone or G3 facsimile machine to the TEL
connector of the VoIP-TA unit via a telephone cord.
To make facsimile connections, the other end terminal equipment should
be compliant with the ITU-T T.38 standard.
Analogue PSTN
Connect an analogue PSTN line to the LINE port at the rear of the VoIP-TA
unit via a telephone cord.