Oki 1.2 - Manual (Page 31)

23 Setup
Saving all setup conditions in a file
The default setting is set to save all setup conditions within a file. This
setting can be changed by clicking on the Save button on the setup
window and displaying the Saved-information select window.
• Activate or deactivate the check
mark for Address table or Other set
values as required. If either or
both items are unchecked then no
record of that setting will be saved
in a file.
• To save, click the OK button.
The File saving window will
be displayed. Specify a name
for the file (in which the
setup conditions are to be
saved), by entering it in the
space next to File name.