Oki 1.2 - Manual (Page 29)

21
• For the LAN connection, a
password entry prompt will
appear. Enter the password, and
click on the OK button. The
product has been shipped with
“TA” set as the default password.
• When the connection settings are
completed, the Main
window is displayed.
When the Data setting and
Status buttons become
active, the connection is
established.
Changing Modes and Setup Conditions
The mode of VoIP-TA can be switched by using the Maintenance Console
Software.
To change the current setup conditions, switch the VoIP-TA to the setup
mode (it is not necessary to switch the VoIP-TA to the setup mode if you
only want to display the setup conditions).
Changing to the Setup mode
• Click on Mode (M) on the
menu bar of the Main window
and select the Change mode
on the pull-down menu.
• The Mode change prompt is
displayed.
• Select the Setup mode on the
Mode pull-down menu and
click the OK button.
• Changing VoIP-TA to other modes is performed in the same way.
The VoIP-TA mode will change although it may take a little time for the mode to
be changed. *
Setup