Omron Programmable Terminals NT31 NT31C - Manual (Page 214)

6-11 Section System Maintenance
204
Display the SCREEN DATA CHECK screen by following the menu operation
from the System Menu shown below.
Select Maintenance Mode.
Select Screen Data Disp.
Specify the screen to be displayed in the input
field in the middle of the screen.
Each of the digits can be incremented or
decremented by pressing the associated +
and
− keys.
Press Set.
Press the touch switches to specify the dis-
play method in each case.
The setting option changes each time a touch
switch is pressed.
Ver 3.10
Displaying the SCREEN
DATA CHECK Screen