Olympus C-4000 Zoom - Manual (Page 117)

116
Chapter 6
Noise reduction
This function reduces the noise that appears on images during long
exposures. When shooting night scenes, shutter speeds become slower and
noise tends to appear on images. When noise reduction is set to ON, the
camera automatically reduces noise to produce clearer images. However,
shooting time is approximately twice as long as usual.
Noise reduction can only be used when the shutter speed is set slower than 1
sec.
In the top menu, select MODE MENU T
CAMERA T NOISE REDUCTION T ON.
Press
. Press again to cancel the menu.
~
“How to use the menu” (P. 39)
Factory default setting: OFF
● Noise reduction is always on in the
mode.
● When you set noise reduction to ON, shooting time is approximately twice
as long as usual, because the camera needs extra time to finish the noise-
reduction process. During this time, shooting the next picture is not
possible.
● When NOISE REDUCTION is ON, sequential shooting (
, , BKT) is
not possible.
● This function may not work well with some shooting conditions or subjects.
● Since the shutter speed is slower when noise reduction is ON, we
recommend that you use a tripod.
Note
Mode dial
setting
button
Noise reduction: OFF Noise reduction: ON
● The images here are only for showing noise reduction effects. They
differ from the actual images.