Erasing pictures, Single-frame erase 137, Chapter 7 – Olympus C-4000 Zoom User Manual
Page 138: Single-frame erase
137
Chapter 7
Erasing pictures
Recorded pictures can also be erased. This can be done either one frame at
a time or to all the pictures in the card.
1
Select a picture you wish to erase by
using the arrow pad.
● If the picture is protected, cancel the
protection first (P. 136).
2
Press the
(erase) button.
● The
ERASE screen is displayed.
3
Press
Ñ
to select YES.
4
Press
to erase the picture.
● To cancel erasing, select NO in step 3 and
press
, or press the
button again.
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
ERASE
YES
YES
N O
SELECT
GO
ERASE screen
● It is not possible to erase protected pictures or pictures stored on a card
that has a write-protect seal.
● Once erased, pictures cannot be restored.
Note
Mode dial
setting
Single-frame erase
Arrow pad
Erase button
button