Olympus C-4000 Zoom - Manual (Page 160)

159
Chapter 8
Power on/off display setting
You can select a picture to display when the power is turned on/off. It is also
possible to register your favorite picture for display when the power is turned
on/off (P. 160). To select the already registered picture, select “2”.
PW ON SETUP: Selects the picture that will be displayed when the power is
turned on.
PW OFF SETUP: Selects the picture that will be displayed when the power is
turned off.
In the top menu, select MODE MENU T
SETUP T PW ON (PW OFF) SETUP T
OFF, 1 or 2. Press
. Press again to
cancel the menu.
~
“How to use the
menu” (P. 39)
OFF: There is no picture.
1
: Factory default setting
2 : Displays registered picture. If no
picture is registered, the monitor does
not display any picture when the
camera’s power is on/off.
● If the battery check indication appears when the power is turned off, the
image you selected for PW OFF SETUP may not appear.
Note
Mode dial
setting
button