Onkyo TX-NR3008 - Manual (Page 16)

16
En
■
7.2-channel Playback with Speakers A or Speakers B
The following illustration shows which speaker should be connected to each pair of terminals for up to 7.2-channel play-
back with Speakers A or Speakers B. If you’re using only one surround back speaker, connect it to the SURR BACK/
ZONE 3 L terminal.
Note
• When Speakers A is selected as the main front speakers, connect the front left speaker to FRONT L, front right speaker to FRONT R.
When Speakers B is selected as the main front speakers, connect the front left speaker to FRONT WIDE/ZONE 2 L, front right speaker
to FRONT WIDE/ZONE 2 R.
• The speakers are configured by using the “Speaker Setup” ( ➔ 50).
• You can choose which of the speakers you want to use with the Speakers A or Speakers B configuration (
➔ 52 ).
• When you use the Speakers B configuration, front high speakers cannot be used.
Surround
back left
speaker
Surround
left
speaker
Surround
right
speaker
Front left
speaker A
Front right
speaker A Center
speaker
Front right
speaker B Front left
speaker B
Surround
back right
speaker