Oreck WS-7013U - Manual (Page 13)

responsive to ambient air currents because of
the shielding effect of the display case. In
addition, the case can act as a heat sink to
absorb and store heat from external sources
(i.e. handling of the case or radiant heat). In
addition, the much greater range of the
outdoor temperature sensor requires a
different calibration curve than the indoor
range. Error is usually greater at the extreme
ends of a range, making it harder to compare
different ranges with different curves. Under
non-laboratory conditions, it is difficult to
compensate for the above factors and obtain
an accurate comparison.
MAINTENANCE AND CARE INSTRUCTIONS
●
Extreme temperatures, vibration, and shock
should be avoided to prevent damage to the
units.
●
Clean displays and units with a soft, damp
cloth. Do not use solvents or scouring agents;
they may scratch the displays and casings.
●
Do not submerge in water.
●
Do not subject the units to unnecessary heat or
cold by placing them in the oven or freezer.
●
Opening the casings voids the warranty. Do
not try to repair the unit.
12