Oreck WS-7013U - Manual (Page 4)

QUICK SETUP
Hint: Use good quality Alkaline Batteries and
avoid rechargeable batteries.
1. Have the indoor temperature station and
remote temperature sensor 3 to 5 feet apart.
2. Batteries should be out of both units for 10
minutes.
3. Place the batteries into the remote temperature
sensor first then into the indoor temperature
station.
(All remote temperature sensors must be
started before the indoor temperature station)
4. DO NOT PRESS ANY BUTTONS FOR
10 MINUTES.
In this time the indoor temperature station and
remote temperature sensor will start to talk to each
other and the display will show both the indoor
and outdoor temperature. If the indoor
temperature station does not display both
temperatures after the 10 minutes please retry the
set up as stated above. After both the indoor and
outdoor temperatures are displayed for 10 minutes
you can place your remote temperature sensor
outdoors and set the time.
The remote temperature sensor has a range of
80 feet and should be placed in a dry, shaded area.
3