Onkyo TX-SR506 User Manual
Page 40
40
First Time Setup
—Continued
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
For TX-SR576
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 42.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
4
Press the [SETUP] button.
Setup closes.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [
]/[
]
buttons to select “1.Input
Assign,” and then press
[ENTER].
3
Use the Up and Down [
]/[
]
buttons to select “1-1.HDMI,” and
then press [ENTER].
4
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[
] buttons to select:
HDMI1:
Select if the video compo-
nent is connected to HDMI
IN 1.
HDMI2:
Select if the video compo-
nent is connected to HDMI
IN 2.
HDMI3:
Select if the video compo-
nent is connected to HDMI
IN 3.
- - - - -:
Select if you’re not using the
HDMI OUT.
5
Press the [SETUP] button.
Setup closes.