One for All URC-7781 - Manual (Page 10)

WW W.ONEFORA LL.COM
9
CHANGE DEV CODE
DVD TV SAT
TV
T0556
INITIAL
SETUP
ADD DEVICE
CHANGE DEVICE
CODE
Changing the Device Code
The following example explains how to replace the old device code with a new device
code without having to ADD a new device.
Example: You just bought a new TV for your living room. This TV may be using a
different code than your current TV in your living room. Just follow the next steps
to change the current programmed device code.
Note: When changing the device code, all settings of the currently setup device
(Key Magic, Learning) will be retained.
1 Press and hold down MAGIC for about
3 sec. and...
will appear on the screen.
2 Press ENTER twice...
will appear on the screen.
3 Press RIGHT ARROW key twice...
will appear on the screen.
4 Press ENTER...
will appear on the screen.
5 Select the mode for which you want
to change the setup code using
the ARROW left/right keys and confirm
pressing ENTER.
…
will appear on the screen.
Press ENTER to confirm.
Next go to page 6
and follow the instructions from
step 4 onwards.
ENTER
x2
ENTER
ENTER
CODE SETUP
x2
706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 9