Oki PM4410 - Manual (Page 30)

E-28 Pacemark 4410 Setup Guide
4. Center the support between the tractors, then position the paper guide
(1) over the support (2).
Right Tractor (viewed from the back of the printer)
1. Open the tractor pin cover, place the paper holes on the pins, then
close the cover.
2. Move the tractor to align the edge of the paper with the appropriate
reference mark (1: this sets the print indent from the paper edge at 0
to 1.5 inches in 0.1-inch increments), then push the lock lever back.
1
2
1