Resetting top of form to the factory setting – Oki PM4410 User Manual

Page 55

Advertising
background image

E-53

Pacemark 4410 Setup Guide

If you have the Forms Tear-Off feature turned on in the menu,
before performing the steps below, press and hold TEAR to
move the paper into the print position, Then, while holding
SHIFT, press TEAR to release the tear, and follow the
instructions below.

1. To move the TOF up:

a. Press and hold SHIFT (

1) while pressing LF/Micro Feed Down

(

2).

b. Press and hold SHIFT, then press PATH/TOF to save the setting.

2. To move the TOF down:

a. Press and hold SHIFT (

1) while pressing FF/LOAD/Micro Feed

Up

(3).

b. Press and hold SHIFT, then press PATH/TOF to save the setting.

Resetting Top of Form to the Factory Setting

To reset the TOF to the factory setting, turn the printer off, then press
and hold GROUP and OPTION (1) while turning the printer back on.

1

Advertising