Oki PM4410 - Manual (Page 33)

E-31 Pacemark 4410 Setup Guide
Changing Paper Paths Manually
To change paper paths manually:
1. Press PARK.
The current paper retracts from the paper path.
2. Press PATH.
The alternate paper automatically loads into the paper path.
Run the Self Tests
Font Sample Test
To print a sample of the available fonts:
1. Make sure continuous form paper at least 8 inches wide is loaded and
that the printer is turned off.
2. Press and hold LF (1) while turning the printer on.
To stop the test before it is complete, press ON-LINE/RESET.
1