Oki 3037 - Manual (Page 420)

ES 3037/3037e Maintenance • 420
TRANSPORTING THE PRINTER
This printer is a precision machine. If it is transported without its
protective packaging it may be prone to mechanical damage.
To prepare the printer for transportation:
1. Turn off the printer.
2. Disconnect the power cable and printer interface cable from
the printer and remove any paper from the paper trays.
3. Open the top cover and remove the four image drums.
4. Seal the aperture on each image drum and its toner cartridge
with plastic adhesive tape (1) to prevent any toner spillage
during transportation.
zimage drum seal.eps
5. Place the four image drums complete with their toner
cartridges back into the printer.
6. Place the LED packing array strips behind the LED heads and
close the cover.