Oki 3037 - Manual (Page 72)

ES 3037/3037e Setting up • 72
Network menu
Only appears if the network card is installed.
The default settings are bold.
Item Value Description
TCP/IP Enable; Disable Selects TCP/IP protocol.
NETWARE Enable; Disable Selects Netware protocol.
ETHERTALK Enable; Disable Selects EtherTalk protocol.
NETBEUI Enable; Disable Selects NetBEUI protocol.
FRAME TYPE
Auto; 802.2; 802.3
Ether-II; Snap Selects Ethernet frame type.
DHCP/BOOTP Enable; Disable Selects whether selection of DHCP/
BOOP is automatic.
RARP Enable; Disable Selects whether selection of RARP is
automatic.
IP ADDRESS xxx.xxx.xxx.xxx Configures IP address of 12
alphanumeric characters.
SUBNET MASK xxx.xxx.xxx.xxx Configures subnet mask of 12
alphanumeric characters.
GATEWAY
ADDRESS xxx.xxx.xxx.xxx Configures gateway address of 12
alphanumeric characters.
PRINT
SETTINGS
ON; OFF Selects printing of network menu
map.
INITIALIZE ON; OFF Selects network initialization.
Memory menu
The default settings are bold.
Item Value Description
RECEIVE BUFF
SIZE Auto; OFF; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB Sets the size of the receive buffer
and depends on the amount of
memory installed in the printer.
RESOURCE
SAVE AUTO; Off; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB Set the size of the font cache area
and depends on the amount of
memory installed in the printer.
FLASH
INITIALIZE
Execute Initializes flash memory if installed.