Oki 3037 - Manual (Page 55)

ES 3037/3037e Setting up • 55
Print Menu
The default settings are bold.
Item Value Description
COPIES 1 to 999 Sets the number of copies.
DUPLEX On; Off Specifies two-sided (duplex) printing
if the optional duplex unit is installed.
BINDING Long edge; Short
edge Sets binding for duplex printing. Only
displayed if duplex is ON.
OUTPUT BIN Face Up; Face Down Specifies output bin.
JOB OFFSET On; Off Sets job offset on or off.
PAPER FEED Tray 1; Tray 2; Tray 3;
Tray 4; Tray 5; MP
Tray Selects source of paper feed. Tray 2
to 5 only displayed if installed.
AUTO TRAY
SWITCH
On; Off Automatic switching to next tray
when tray in use empties.
TRAY
SEQUENCE Down; Up; Paper
feed tray Specifies selection order priority for
switching Auto Tray Select/Auto Tray
Switch.
MP TRAY
USAGE Normal tray; High
priority tray; Feed
when mismatching;
Do not use Specifies MP tray usage.
Normal tray: (Tray select/switch)
Use as a normal tray.
High priority tray: (Valid with Tray
select only). If there is paper in the
MP tray and Duplex is not specified,
the printer uses the MP tray.
Feed when mismatching. When a
paper mismatch occurs (i.e. the
tray’s paper size/media type does
not match the print data), a paper
request is issued to the MP Tray. If
the data is for Duplex print, a
specified tray is used instead of the
MP tray.
Do not use. Even if auto switching,
MP Tray will not be used. If MP Tray
is designated in Paper Feed, printer
behaves as though Normal Tray is
selected.
MEDIA CHECK Enable; Disable Sets whether the printer checks the
matching of paper size to that of the
tray. Only standard sizes are
checked.
TRANSPARENCY
DETECT Auto; Disable Enable/Disable the transparency
auto detect function.