Oregon Scientific EB833 - Manual (Page 10)

EN
10
To View Different Displays in Barometric Mode:
1. Press [BARO] to move between barometric functions.
Normal Barometric Display
The first display in Barometric Display Mode.
NOTE The unit will automatically enter Normal Barometric
Display when first entering the Barometric Mode.
Display shows:
2. Press [BARO] again to view the Barometric
Pressure History Display
Display shows:
* Previous barometric levels can be displayed for up
to 12 hours. Press [+} or [-] to display previous
barometric levels at one hour intervals for the past
12 hours.
3. Press [BARO] again, to return to the Normal
Barometer Display.
BAROMETRIC CALIBRATIONS
At sea level or near a reliable source like a weather
station, the barometer can be calibrated.
To calibrate the barometric function:
1. Enter Normal Barometric Display.
2. Simultaneously press and hold [BARO] and [TIME]
for about 2 seconds. The “CAL Po” will be displayed
and the current barometric digits will flash.
3. Press [+] or [-] to adjust barometric readings.
4. Press [BARO] to return to the Barometric Display
Mode.
UNITS OF MEASURE FOR BAROMETRIC
PRESSURE
Barometric units of measurement can be displayed as
mb, hpa, and inHg.
To change the units of measurement:
1. Enter the Normal Barometric Display.
WEATHER
FORECAST
INDICATORS
CURRENT
TEMPERATURE CURRENT
TIME
CURRENT
PRESSURE
PRESSURE
CHANGE
TREND
GRAPH
NORMAL BAROMETRIC DISPLAY
ONE HOUR
PREVIOUS*
BAROMETRIC HISTORY DISPLAY
CORRESPONDING
BAROMETRIC
PRESSURE
LEVEL AT THE
INDICATED TIME
BARO ICON
EB833(EN3) 8/31/04, 3:40 PM 10