Outback Power Systems Inverter/Charger VFX2612E - Manual (Page 15)

Copyright 2003  OutBack Power Systems, Inc. FX & VFX “E” Series Inverter/Charger System Installation & Programming Manual
19009 62 nd Ave NE, Arlington WA 98223 USA 900-0027-2
Tel 360 435 6030 Fax 360 435 6019 Rev 7.1 06/08/06
Page 15
FX ACCESSORIES
FX-ACA (AC CONDUIT ADAPTER)
This plastic box slips into grooves on the AC end of the FX. This adapter extends
the AC wiring compartment to match the PSAC or PS2AC. It also provides more
room for wiring than is available when using the supplied flat knockout plate.
There is a 2-inch TSC cut-out on the plastic box to allow it to be used with the
PSAC or PS2AC disconnect enclosure.
FX-DCA (DC CONDUIT ADAPTER)
The FX-DCA allows the connection of 2-inch TSC conduit to the FX. It fits on the
opposite end of the FX from the AC wiring compartment. The location of the 2-
inch conduit opening matches the 2-inch knockouts provided in the PSDC or
PS2DC enclosure.
When installing an FX with a PSDC or PS2DC disconnect enclosure, both the
FX-DCA and FX-DCC are required.
FX-DCC (DC COMPARTMENT COVER)
The FX-DCC covers the DC terminal area and allows a space which can be used
to mount other components such as a DC current shunt. The FX-DCC can be
used with or without the FX-DCA.
When installing an FX with a PSDC or PS2DC disconnect enclosure, both the
FX-DCA and FX-DCC are required.
FXA ACCESSORY KIT
The FXA includes all three of these FX accessories in one box.