Olympus E-P2 - Manual (Page 100)

100
EN
Customi
zing you
r cam
er
a
7
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
8
When set to [OFF], you can turn off the beep sound that is emitted when the focus locks by
pressing the shutter button.
SLEEP
After a specified period of time elapses with no operations being performed, the camera
enters the sleep mode (stand-by) to save battery power. [SLEEP] lets you select sleep timer
from [1MIN], [3MIN], [5MIN], or [10MIN]. [OFF] cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button,
q button,
etc.).
USB MODE
If you specify the device you are connecting to beforehand, you can skip the USB connection
setting procedure normally required every time you connect the cable to the camera. For
details on how to connect the camera to either device, refer to “Connecting the camera to a
printer” (
gP. 112) and “Connecting the camera to a computer” (gP. 117).
[AUTO]
The selection screen for the USB connection will be displayed every time you connect
the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS
Master software via PC connection.
[MTP]
Set this to transfer images in Windows Vista/7 without using the OLYMPUS Master
software.
[PRINT]
Can be set when connecting the camera to a PictBridge-compatible printer. You can
print out pictures with set number of prints, print paper and other settings.
g“Connecting the camera to a printer” (P. 112)
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
s0026_e_00_0_unified.book Page 100 Tuesday, September 29, 2009 10:30 AM