Olympus E-P2 - Manual (Page 35)

35
EN
Taking pictures without
noise
Set [NOISE REDUCT.] to [AUTO] or [ON]. P. 104
To take pictures in a dark location, set [NOISE FILTER]
to [HIGH].
P. 105
Optimizing the LCD
monitor
You can adjust the brightness of the LCD monitor. P. 90
During live view, set [LIVE VIEW BOOST] to [ON] to
make the subject easier to see without the exposure
reflecting on the LCD monitor.
P. 101
Set this to turn off the LCD monitor when using the
optical viewfinder (sold separately: VF-1).
P. 97
Reducing camera shake
Set the image stabilizer function. P. 57
Hold the camera firmly when pressing the shutter button.
When using a slow shutter speed, be sure to stabilize
the camera by using a tripod or similar method.
P. 13
Use the external flashes. P. 61
Set the scene mode to [DIS MODE]. P. 11
Increase the ISO sensitivity. When using the [AUTO]
setting, set the upper limit of [AUTO] to a higher value. P. 46,
P. 103
Using the self-timer can reduce camera shake that
occurs when the shutter button is pressed.
P. 57
Taking pictures while
checking the level of the
camera
You can display the level gauge to check whether the
camera is level.
P. 101
Display the ruled lines in live view. Compose the shot so
that the subject and ruled lines are horizontally and
vertically aligned.
P. 23
s0026_e_00_0_unified.book Page 35 Tuesday, September 29, 2009 10:30 AM