Olympus E-P2 - Manual (Page 124)

124
EN
10
Sh
ooting tips
and main
te
nance
m The internal temperature of the
camera has risen due to
continuous use, for example. Turn off the camera and wait for the
internal temperature to cool.
Internal camera
temperature is too
high.
Please wait for
cooling before
camera use.
Wait a moment for the camera to turn off
automatically. Allow the internal
temperature of the camera to cool before
resuming operations.
BATTERY
EMPTY
The battery is drained. Charge the battery.
NO CONNECTION
The camera is not connected to
the computer or printer correctly. Disconnect the camera and connect it
again correctly.
NO PAPER
There is no paper in the printer. Load some paper in the printer.
NO INK
The printer has run out of ink. Replace the ink cartridge in the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera. Do not manipulate the printer while
making settings on the camera.
PRINT ERROR
There is a problem with the
printer and/or camera. Turn off camera and printer. Check the
printer and remedy any problems before
turning the power on again.
CANNOT PRINT
Pictures recorded on other
cameras may not be printed on
this camera. Use a personal computer to print.
The lens is locked.
Please extend the
lens. The lens of the retractable lens
stays retracted. Extend the lens.
Please check the
status of a lens.
An abnormality has occurred
between the camera and the
lens. Turn off the camera, check the connection
with the lens, and turn the power on again.
Monitor
indication
Possible cause Corrective action
s0026_e_00_0_unified.book Page 124 Tuesday, September 29, 2009 10:30 AM