Quantum Data 700A - Manual (Page 25)

25
Specifications
Video Formats
Storage: 132 total
Press Signal Type button to view signal types.
Edit method:
Windows-based VGM software
Test Images (Patterns)
Press Image button to list images.
Horizontal Timing
Frequency: 1 KHz to 250 KHz
Total pixels: 144 to 4096
Active range: 16 to 4096 pixels
Vertical Timing
Frequency: 1 Hz to 650 Hz
Active lines: 1 to 4096
Scan types: Progressive, 2:1 Interlace
Sync Types
Separate digital horizontal and vertical
Digital and analog composite
Bipolar HDTV
Video Outputs
Timing accuracy: 2%
Connectors:
See diagram on page 3.
SDI / HD-SDI (701A only)
Connector: BN DI - SMPTE 292M-C
Links: Single
Bit stream: 1.485 Gb/s and 1.485/1.001 Gb/s
Encoding: 4:2:2
Bits/component: 10-bits/component
Sampling mode: YCbCr
Signal swing: 800mV
Standards:
SDI - SMPTE 259M;
HD-SDI - SMPTE 292M-C
Digital Video
Pixel rate: Single link 75 MHz
Audio Outputs
Connecter: 3.5 mm stereo phone jack
Signals: Left: 1 KHz tone
Right: 2 KHz tone
User Interface
Display: 4 x 20 character backlit LCD
Buttons: 9 function buttons, 8 menu buttons, 2
paging buttons
Computer Interface
Type: RS-232, 9 pin D-sub
Protocol: 9600 baud, 8-N-1, Xon/Xoff
VESA EDID/DDC Support
Reads a monitor’s EDID data through DVI
connector, and shows list of supported
standard formats. DDC test mode for
cycling through supported standard
formats.
Battery Power Operation
Type: Six AA 1500 mA-H rated
rechargeable NiMH batteries
(included)
Use time: 8 hours with fully charged NiMH
batteries. Less when using
backlight, DVI, NTSC, or RF
features.
AC Power Operation
Type: External charger/power supply
supplied with unit
Input: 100-240 VAC @ 47-63 Hz
Output: 12V
Size and Weight
Size: H 5.5 x W 8.25 x D 2 inches
H 140 x W 210 x D 51 mm
Ship weight: 4 lbs, including batteries