Quatech QSP-100 - Manual (Page 30)

6. Click on the QSP-100 item and then click on the button labeled "Properties".
7. Select the resource which requires a change (I/O range or IRQ) and select "Change
Settings". Make the desired changes and then click on "OK". A shutdown of the
system may be required to allow the settings to change. If prompted for a shutdown,
select the option which restarts Windows 95.
8. The QSP-100 will be automatically re-configured to the desired settings.
9. The card is now ready for use.
QSP-100 Users Manual 27