Quantum Tape Drive A-Series - Manual (Page 24)

Chapter 2 Getting Started
Resetting System Defaults
Quantum A-Series Tape Drives User’s Guide 8
4 After the third ejection, connect your network cable and switch your
cartridge write protection on or off (as you need it), then reboot the
drive.
You can now set up the drive using the default IP address (10.10.10.10) as
the flash memory has been erased.
Table 2 System Defaults
Name Password/Setting
Static IP address 10.10.10.10
Netmask 255.255.255.0
Main login admin
Username root
Default password password