QUASAR Palmcorder VM-L152 - Manual (Page 14)

14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Date and time including leap year are
calculated up to DEC 31, 2099.
Spring (First Sunday in April) :
ahead one hour.
Autumn (Last Sunday in October) :
back one hour.
Clock will auto-adjust to daylight saving time (DST).
Setting the Time Zone
• When traveling, repeat this operation and
select one of the 8 listed time zones to
set the clock to local time.
Press UP or DOWN to
select OFF or AUTO.
Press DISPLAY to
confirm entry.
Press UP or DOWN to
select local time zone.
Press DISPLAY to
confirm entry.
DST: AUTO
Press or hold down UP or
DOWN to select hour, then
press DISPLAY to fix.
Repeat for minute, month, day,
and year.
Clock starts when year is
entered and DISPLAY is
pressed.
EXAMPLE :
Note:
• Auto DST does not function if time zone
is set to Hawaii or Samoa (see “Setting
the Time Zone” above).
Note :
• Clock may lose or gain up to 2 minutes
per month.
• When traveling outside the listed time
zones, set clock to local time manually.
• To adjust or set clock, see “Setting Date
and Time” bottom of page.
The Camcorder is preset to DST: AUTO .
If DST is not observed in your area, set
to
OFF by doing the following.
[ Time Zone chart ]
The Camcorder is preset to Eastern time.
Auto Daylight Saving Time
Setting Date and Time
Setting the Clock
3a
3b
3c
02.L152 Getting p08-15 02.2.18, 1:38 PM 14