QUASAR Palmcorder VM-L152 - Manual (Page 29)

29
For
Y
our Information
Viewfinder/LCD Monitor Indications
Recording the Date and Time
a
Do steps 1 and 2 above to select time/date,
date only, or no display.
b
Start a recording (page 16).
• Only the Date and/or Time are recorded.
1
Set POWER to CAMERA.
2
Press DISPLAY
repeatedly to select
the following displays.
FULL
EMPTY
Tape Remaining: Battery Remaining:
FULL
EMPTY
• Tape remaining indicator operates a few
seconds after tape starts moving.
A
Set POWER to CAMERA or VCR.
B
Press MENU for MENU mode.
Press UP or DOWN to select
DISPLAY .
C
Press DISPLAY to select OFF.
Press MENU to exit.
D
Press DISPLAY repeatedly to remove time/date.
Indications are restored the next time Camcorder is
turned on.
[CAMERA MODE] [VCR MODE]
Display-Off Mode
Tape remaining and battery charge level
can be displayed. Before you begin...
• Connect Camcorder to power source.
2
,
B
,
C
,
D
1
,
A
06.L152 Infor p29-34 02.2.18, 1:39 PM 29