QUASAR Palmcorder VM-L152 - Manual (Page 24)

24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Note:
• Shutter speed cannot be set to 1/60 if Digital
E.I.S. feature is set to ON.
• Provide additional halogen or tungsten light
for use indoors or in poor light. Fluorescent
light degrades picture.
• Auto Focus may not function properly if high
speed shutter is used in inadequate light.
• Setting reverts to AUTO each time POWER is
set to CAMERA.
Improves Still or Slow Motion playback
picture of high speed subjects (e.g. a tennis
stroke), when viewed on Camcorder or 3 or
4 head VCR.
High Speed Shutter
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 10).
• Set POWER to CAMERA.
In AUTO mode (no indication in EVF or LCD Monitor), shutter speed is auto-adjusted from
1/60 to 1/350 according to subject brightness.
• AUTO mode is selected each time POWER is set to CAMERA.
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
Manual Selection
Auto Shutter
1
Press MENU for MENU mode.
Press UP or DOWN to select
SHUTTER .
2
Press DISPLAY repeatedly to select
shutter speed.
3
Press MENU to exit.
1
,
2
,
3
05.L152 Special p22-28 02.2.18, 1:38 PM 24