Toshiba D-R400 - Manual (Page 43)

43 EN 43 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
1 Press [SATELLITE LINK].
2 Use [
K / L] to select the time and
recording mode, then press [ENTER].
Satellite Link
Start Mode
12:00 AM XP
To Standby Mode
3 Use [
K / L] or [the Number buttons]
to set the desired starting time, then
press [
B ].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in this step to set the
desired minutes.
• If you wish to go back to the left, press [
{].
4 Use [
K / L] to select the recording
mode.
Refer to page 34 for details.
Instructions continue on the next page.
SE-R0265
OPEN/
CLOSE
INPUT
SELECT HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURN
MENU/LIST
WXYZ
JKL MNO
DEF
ENTER
SKIP REV
PLAY
REC MODE ZOOM REC REPEAT
PAUSE
TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP
STOP
FWD SKIP
TIMER
PROG.
SATELLITE
LINK
ENTER
SATELLITE
LINK