Paper jam (single sheets), Paper does not move to tear off position – Tally Genicom MATRIX PRINTER 2250 User Manual

Page 110

Advertising
background image

➲

Paper jam (single sheets)

Open the top cover and remove the paper manually or with the functions
LF (line feed)/FF (form feed) in Offline mode from the printer.

Before you replace the single sheet, refer to the instructions in the
section

Inserting paper – single sheets

.

Pay attention to the following points:

Set single sheet feed to the corresponding paper width.

Insert the paper straight as far as possible.

Adjust the printhead gap to the paper thickness (multiple forms, etc.).

➲

Paper does not move to tear off
position

Single sheet inserted.

It is only possible to tear off when fanfold paper is used, refer to the sec-
tion

Moving paper to the tear position

.

BACK

QUIT

?

PRINT

Reference manual

Troubleshooting

100

Advertising
This manual is related to the following products: