Tally Genicom MATRIX PRINTER 2250 - Manual (Page 111)

➤
Problems with the
print quality
➲
Print is too pale 1. The ribbon is used up or the ribbon cassette is not correctly fitted. Refer to
the section Changing the ribbon cassette .
2. The printhead to platen gap is not correctly set, refer to the section
Setting the printhead gap.
For printers with the AGA = always or once: Enter a correction value <0
(correction value 0 to -10). See the section
Setting the printhead gap .
➲
Smudged print 1. The ribbon is damaged (e.g. frayed). Change the ribbon as described in
the section Changing the ribbon cassette .
2. The printhead gap is too small, increase the gap. See the section Setting
the printhead gap .
For printers with the AGA = always or once: Enter a correction value >0
(correction value 0 to +10). See the section
Setting the printhead gap .
BACK QUIT
?
PRINT
Reference manual Troubleshooting
101