Tally Genicom MATRIX PRINTER 2250 - Manual (Page 90)

➤
Setting the AGA function This function allows you to switch the Automatic Gap Adjustment (AGA)
off or on.
Select the AGA menu (3).
Setting options: Off/once/always
Default setting: always
AGA=always: The printer checks the paper thickness:
– after power-on
– in single-sheet mode: every sheet
– in fanfold paper mode: each time the paper path is changed and at
paper end.
AGA=once: The printer checks the paper thickness only once after
power-on for each selected paper path and after paper end.
AGA=Off: selects manual gap adjustment; the value can be set for each
paper source and each of the 3 menus available.
Confirm the setting by pressing the key Set (1). The printer automatically
leaves Testmode and assumes Online mode.
Formlen AGA
Online
Setup
Back Next
2 1 3 4
AGA=always * AGA=always *
Online Online
Setup Setup
Set < > Exit Set < > Exit
2 2 1 1 3 3 4 4
BACK QUIT
?
PRINT
Reference manual Mechanical adjustments to the printer
80