Tascam FW-1884 - Manual (Page 8)

Page 8 of 35
Windows Features (V1.10 & above)
Quick Start (WDM)
The tab shown below, Quick Start, has been added to the Windows Control Panel. This
allows you to specify a set of channels which will always stream when using WDM/KS
Driver Mode in Sonar. This, for example, speeds up the start of a playback or record
operation in SONAR... especially when there are a lot of channels enabled. If there is a
hesitation after pressing PLAY or RECORD before the operation begins, try enabling this
feature.
To use it, check the channels that you will be using in your WDM audio app. When the
channels selected in the Quick Start tab match the channels actually used by your
application, the FW­1884 will not have to re­sync when the application begins to use
those channels. This has shown to be much faster, and less prone to produce an “audio
engine stop” message.