Technicolor - Thomson SpeedTouch 510 - Manual (Page 33)

2 SpeedTouch™ Web Interface
3EC 37891 AAAA TCZZA Ed. 01 29
DNS C lick this link to display the Dynamic Name System (DNS) page.
This page allows you to:
• View and/or supply the SpeedTouch™ DNS domain name and to enable/disable
the SpeedTouch™ DNS server:
Note: The use of DNS subdomains is supported, e.g. dsl.office.lan.
• View the current SpeedTouch™ DNS server hostname leases:
Via this table you can also add static DNS hostname entries.
This may be useful for devices which do not support DNS, e.g. a printer. By adding
a name for your network printer, identified by its IP address, you will be able to
contact this printer by name rather than by IP address.
Note: Do not forget to save your changes to persistent memory by clicking “ Save all” .
DHCP C lick this link to display the Dynamic Host Configuration Protocol (DHCP) page.
This page allows you to:
• Enable/disable the SpeedTouch™ (Auto)DHCP server:
The SpeedTouch™ features a DHCP server which allows the PCs/computers on
your local network to automatically obtain an IP address (select
DHCP server ). If
no DHCP is used on your local network, the SpeedTouch™ DHCP server can be
disabled (select
No DHCP ). The SpeedTouch™ can also search your local
network for another DHCP server (select AutoDHCP ). If so, it slips into DHCP
client mode, if not the SpeedTouch™ becomes DHCP server. Click Apply to apply
your selection.