Toshiba Tosvert Inverter E6580772 - Manual (Page 24)

E6580772
23
5. Specification
<Environment Specification>
Item Specification
Use Environment
Indoor, less than 1,000 m from the sea level.
No direct sunlight, corrosive or explosive gas, steam, cutting dusts or dusts,
grinding solution, and grinding oil.
Ambient Temperature -10 to +50
Storage Temperature -25 to +65
Relative Humidity 20 to 90 % (No condensation)
Vibration 5.9m/s² or less
< PG feedback specification >
Full-vector
operation with
sensor
Speed control operation: [150% torque at 0 speed,
speed control range: 1:1000(1000 ppr PG),
speed accuracy ±0.02% (50 Hz base digital input)]
Torque control operation: [torque control accuracy ±10%,
(torque control range: -100 to 100%)]
PG Method Complementary, Open-collector
PG Wiring Length 100m (Max.)(Complementary)
PG Power Supply 12V -160mA
Max. Pulse Input
Frequency
120kHz or less (single-phase),
60kHz or less ( two-phase)
* (In case of 2-phase open collector method, derating need to be considered)
Pulse duty: 50±10%
Pulse input voltage 12V dc to 15V dc
Recommended
Encoder
Manufacturer: SUMTAK Co., Ltd.
Type: LBJ series
Supply Voltage: 12V
Output Method: complementary output
Encoder Wiring
(Recommended
Cable)
Type of Wire: Twisted Pair Shield Cable
Conductor Resistance:
Conductor Resistance (Ω/m) x cable length (m) x 2 x power consumption (A)
＜V
D
(V)
V
D
(V): 1.0(V) [PG for 12V]
Applicable Wire: 0.2-1.5mm²
(Power Line) In case of 0.2mm² cable: maximum of 30m [Complementary PG]
maximum of 10m [Open collector PG]
KURAMO Electric: KVC-36SB , Furukawa Electric: ROVV-SB