Teac CD Recorder/Reverse Cassette Deck AD-RW900 User Manual
Page 13
13
17
Reverse/Forward play (g/t)
Press these buttons to start playback of the back (g)/front (t)
side of a tape.
Press during tape playback/recording standby to restart
playback/recording.
18
DOLBY NR switch
Use this switch to turn Dolby noise reduction on and off
(pages 10 and 28).
19
PITCH CONTROL knob
Turn this knob to vary the playback speed (page 30).
20
REV (Reverse) MODE switch
Use this switch to select the reverse mode (page 28).
21
RECORD (K)
Use to record to a CD. Press once to enter recording standby, and
press again to start recording (page 32-33).
Press this button during recording to add a track number in the
song (page 34).
22
FOLDER ( / )
Use these buttons to select folders (pages 21 and 23).
23
POWER ON START OFF-PLAY-REC (TAPE)
Use this switch to select the timer setting (play, record or off).
To use this when set to play or record, connect a commercially
available audio timer to this unit (pages 45-47).
24
Play/Pause (t/J)
Press this button during playback or recording of a CD to pause.
Press this button again to resume playback or recording.
Use also to start finalizing, unfinalizing and erasure.
25
Stop (H)
Press this button to stop CD playback.
Press this button also to stop recording to CD.
26
Skip (/)/Search (,)
Auto (AUTO)
When in USB mode, press this button to skip to the next track.
Press and hold this button during playback to search forward.
When recording to a CD, press this button to change how
numbers are added to tracks (page 31).
27
Skip (.)/Search (m)
Sync (SYNC)
When in USB mode, press this button to skip to the previous
track. Press and hold this button during playback to search
backward.
When recording to a CD, press this button to change the sync
recording mode (one track or all tracks) (pages 34-35).
28
POWER ON START CD-TAPE-USB
Use this switch to set the sound source that is active when the
power is turned on.
Use this switch to set the media used for timer playback/
recording. (The timer recording can only record to cassette tape.)
To use timer playback/recording, connect a commercially
available audio timer to this unit (pages 45-47).
29
Play/Pause (t/J)
Press this button during USB flash drive playback or recording to
pause.
Press again to resume playback or recording.
30
Stop (H)
Press this button to stop USB playback.
Press this button also to stop recording to USB.
31
Erase (ERASE)
Finalize/Erase (FINALIZE/ERASE)
When in USB mode, use to erase files from the USB flash drive
(page 42).
When in CD mode, use to finalize a recorded CD-R/CD-RW, and to
erase recorded songs on or unfinalize a CD-RW (pages 36-38).
32
Disc tray
33
USB port (A-type)
Connect an external USB flash drive here.
34
POWER
Press this button to turn the unit on or off.
CAUTION
Never turn the unit off or disconnect a USB flash drive
when it is being accessed, for example, during writing,
playback, recording or the erasure of files.
Doing so could damage the AD-RW900 and the connected
USB flash drive.
CAUTION
Never turn the unit off when it is writing to a CD
(recording, finalizing, unfinalizing, deleting a track).
Doing so could result in the disc being unplayable or
damage the AD-RW900.
14
15
16