Clearing the program, Exiting program mode, Checking the program order – Teac CD Recorder/Reverse Cassette Deck AD-RW900 User Manual

Page 27: Deleting tracks/files from the program

Advertising
background image

27

Clearing the program

Hold down

more than 1 sec.

When playback is stopped, press the PROGRAM button, followed
by the CLEAR button more than 1 second.
The PROGRAM indicator disappears and all the contents of the
program are cleared.

< If the PROGRAM indicator is not shown, press the PROGRAM

button to activate program mode before pressing the CLEAR
button.

< If one of the following buttons is pressed, the contents of the

program are also cleared.

In CD mode

POWER, CD OPEN/CLOSE (L), SOURCE

In USB mode

POWER, SOURCE

Exiting program mode

When playback is stopped, press and hold the CD/USB Stop (H)
button. The PROGRAM indicator will disappear.

< This does not clear the contents of the program. Press the

PROGRAM button again and then press the CD/USB Play/Pause
(t/J) button if you want to restart program playback.

Checking the program order

Press repeatedly

When playback is stopped, press the PROGRAM button repeatedly.
The numbers of the programmed tracks/files and their program
numbers will be shown in order.

Deleting tracks/files from the program

When playback is stopped, press the PROGRAM button repeatedly
until the program number of the track to be deleted
appears
on the display.

Press repeatedly

Example:

Program number
to be deleted

Press the CLEAR button.

The track/file is deleted from the program.

Advertising
This manual is related to the following products: