TRENDnet TW100-BRF114U - Manual (Page 10)

6
Chapter 2
Installation
This Chapter covers the physical installation of the Broadband Router.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either a DSL or Cable
modem.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the TW100-BRF114U.
Ensure the TW100-BRF114U and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the TW100-
BRF114U. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN cable.
Any LAN port on the TW100-BRF114U will automatically function as an "Uplink" port
when required.
2