TRENDnet TW100-BRF114U - Manual (Page 13)

Setup
9
Configuration Program
The TW100-BRF114U contains an HTTP server. This enables you to connect to it, and con-
figure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
• Netscape V4.08 or later
• Internet Explorer V4 or later
Preparation
Before attempting to configure the TW100-BRF114U, please ensure that:
• Your PC can establish a physical connection to the TW100-BRF114U. The PC and the
TW100-BRF114U must be directly connected (using the Hub ports on the TW100-
BRF114U) or on the same LAN segment.
• The TW100-BRF114U must be installed and powered ON.
• If the TW100-BRF114U's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRF114U is allocated a
new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the TW100-BRF114U will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
• Unless you intend to change the IP Address of the TW100-BRF114U, you can accept the
desktop shortcut.
• Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
• Double - click the icon for the TW100-BRF114U (either on the Desktop, or in My Net-
work Places) to start the configuration. Refer to the following section Setup Wizard for
details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the TW100-BRF114U:
1. After installing the TW100-BRF114U in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the TW100-BRF114U, as in
this example, which uses the TW100-BRF114U 's default IP Address:
HTTP://192.168.0.1