TRENDnet TW100-BRF114U - Manual (Page 14)

Broadband Router User Guide
10
If you can't connect
If the TW100-BRF114U does not respond, check the following:
• The TW100-BRF114U is properly installed, LAN connection is OK, and it is
powered ON. You can test the connection by using the "Ping" command:
• Open the MS-DOS window or command prompt window.
• Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the TW100-BRF114U 's IP Ad-
dress. (See next item.)
• If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.0.2 to 192.168.0.254 to be compatible with the TW100-BRF114U's
default IP Address of 192.168.0.1. Also, the Network Mask must be set to
255.255.255.0. See Chapter 4 - PC Configuration for details on checking your
PC's TCP/IP settings.
• Ensure that your PC and the TW100-BRF114U are on the same network
segment. (If you don't have a router, this must be the case.)