T+A Elektroakustik K1 CD-RECEIVER - Manual (Page 16)

16
Menu point 2 + 3: BASS + TREBLE
press
2x
BA SS 0 0
AMP OK
press
3x
TR EB LE 00
AMP OK
Introduction:
The system features active tone control faci-
lities. The tone controls are designed to com-
pensate for the negative effects of adverse
loudspeaker positions or unusual conditions
in the listening room.
Operation:
To change the tone settings press the remote
control buttons in the sequence shown above.
The screen shows the current bass or treble
setting for both stereo channels, e.g.:
'BASS +02' or 'TREBLE +04'
These settings can be altered over the range
- 14 dB (less bass / treble)
to
+14 dB (more bass / treble)
(     or    –button)
Any change you make takes effect immedia-
tely. The function is terminated by pressing
the
    button.
If none of the menu control buttons
(
   ,     /     or    ) are pressed
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)