T+A Elektroakustik K1 CD-RECEIVER - Manual (Page 8)

8
THE FRONT PANEL CONTROLS
4 3 2 1 7 5 8 6 9 10
We have developed an overall methodology
for controlling the system based on a small
number of buttons, each of which has several
functions depending on the situation.
To help you understand the system the but-
tons are duplicated by illuminated symbols
which indicate their current function.
   
CD DRAWER
Press the     button to open and close
the CD drawer.
   
HEADPHONES
Barrel socket (ø3.5 mm) for headphones,
minimum impedance 50 Ω.
   
INFORMATION SCREEN
All the system's information displays are
shown on a clearly legible screen, carefully
laid out to make it easy to understand. At any
one time the screen only shows the essential
information relating to the current audition-
ing source (TUNER or CD). This helps con-
siderably in avoiding confusion.
Operating trouble of the amplifiere is sig-
naled by flashing symbols A and B (see trou-
ble shootings).
The screen also shows supplementary infor-
mation when required, i.e. seldom needed,
machine-specific data. This information is
shown in an alpha-numeric area, in plain lan-
guage with the help of symbols. For further
information please read the appropriate
chapters.
        ON
The system's On/Off button. When you
switch the system on the screen shows the
auditioning source you have selected, or a
machine-specific message. When you switch
on, the system is always in the setting in
which it was last listened to. The volume is
initially limited to "room level".
Caution:
The mains button is not a mains isola-
tion switch. Even when the Ready indi-
cator on the screen is not glowing, a few
parts of the machine are still connected
to the mains power supply. If the unit is
not to be used for a long period it
should be isolated from the mains by
pulling out the mains plug at the wall
socket.